Pollex UV/LED Nail Lamp

Shills Professional Pollex UV/LED Nail Lamp is a professional nail-curing device designed to cure compatible UV and LED gel nail products efficiently during manicures, nail extensions, overlays, pedicures, and creative nail-art services. Combining UV/LED curing functionality in a convenient salon-style lamp, it provides the essential light exposure required to set compatible gel base coats, colour gel polish, builder products, nail-art gels, extension gels, and finishing top coats.

A dependable curing lamp is one of the most important pieces of equipment in any professional gel nail system. Gel products do not simply air-dry like conventional nail polish; they require exposure to suitable curing light to polymerize and reach their intended hardened state. The Pollex UV/LED Nail Lamp provides a dedicated curing environment for this process, helping nail technicians complete each stage of a gel manicure in an organized and professional manner.

Its full-size lamp format makes it suitable for complete curing cycles rather than only targeted flash curing. The hand can be positioned within the lamp during base, colour, nail-art, builder, and top-coat stages, allowing technicians to work through a complete gel manicure using one dedicated curing station.

Whether used in a professional nail salon, beauty academy, nail studio, mobile setup, or experienced home manicure station, the Pollex UV/LED Nail Lamp offers a practical solution for compatible light-curable nail systems.

Key Features
Professional UV/LED Nail Curing Lamp: Designed specifically for curing compatible UV and LED gel nail products.
Dual Curing Compatibility: Suitable for a broad selection of compatible UV/LED-responsive gel formulations.
Full-Size Curing Design: Intended for complete manicure curing cycles rather than only small-area flash curing.
Suitable for Gel Polish: Can be incorporated into colour-gel manicure and pedicure services.
Suitable for Base Gel: Useful for curing compatible base coats before colour application.
Suitable for Top Coat: Completes the final curing stage of compatible glossy, matte, construction, and specialty top gels.
Useful for Builder Gel: Can be used with compatible builder gel and structured manicure systems.
Suitable for Gel Extensions: Useful during compatible nail extension and full-cover gel-tip services.
Compatible With Nail-Art Gels: Suitable for curing painting gels, liner gels, carving gels, rhinestone gels, and other compatible UV/LED nail-art products.
Convenient Salon Equipment: Designed to become a central curing tool within a professional manicure workstation.
Suitable for Manicures & Pedicures: Can be incorporated into both hand and foot gel services where the physical design permits appropriate positioning.
Professional & Personal Use: Suitable for technicians, salons, beauty academies, nail artists, and experienced gel users.

Step 1 – Prepare the Natural Nails

Begin with clean and properly prepared nails.

Shape the natural free edge according to the manicure or enhancement service.

Complete appropriate cuticle preparation.

Step 2 – Remove Dust and Residue**

Clean the nail surface thoroughly.

Remove:

Filing dust
Natural oils
Moisture
Lotion
Cream
Surface residue

Correct preparation supports better performance of the complete gel system.

Step 3 – Apply Nail Preparation Products if Required**

Use compatible dehydrator, primer, bonder, or other preparation products where required by the chosen manicure system.

Step 4 – Apply Base Coat**

Apply a thin and even layer of compatible UV/LED base gel.

Keep uncured gel away from surrounding skin.

Step 5 – Position the Hand**

Place the hand comfortably inside the lamp.

Position the fingers so that each nail has suitable exposure to the curing light.

Avoid overlapping the fingers.

Step 6 – Cure the Base Coat**

Use the curing procedure recommended for the base product being applied.

Do not select curing duration purely according to lamp wattage.

Step 7 – Apply Gel Colour**

Apply a thin and controlled layer of compatible gel polish.

Step 8 – Cure the Colour**

Place the hand back inside the lamp.

Complete the recommended curing cycle for the colour gel.

Step 9 – Apply Another Colour Layer if Required**

For greater opacity, apply a second thin coat.

Cure again.

Step 10 – Complete Nail Art**

Add compatible gel-based nail art where desired.

This may include:

Cat-eye gel
Painting gel
Carving gel
Metallic liner gel
Glitter gel
Rhinestone gel
French detailing
3D gel art

Cure each layer according to the specific product requirements.

Step 11 – Apply Top Coat**

Apply the selected compatible finishing gel.

Possible options can include:

High Shiny Top Coat
Matte Top Coat
Rubber Matte Top Coat
Construction Top Coat
Other compatible specialty top gels
Step 12 – Complete the Final Cure**

Cure the top coat according to its specified UV/LED curing requirements.

Step 13 – Finish the Manicure**

Complete any cleansing step required by the finishing gel.

Apply cuticle oil after the full manicure has been completed.